- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
16 x E1 over IP | TDM over IP | Low Delay Transmission Converter / Multiplexer
Previous | 5 / 19 | Next |
- E1 TDM Over IP Ethernet Converter Multiplexer
- TDM Over IP Ethernet Converter Multiplexer
- 16E1 TDM Over IP Ethernet Converter Multiplexer
Description
AN-TDM-IP-16E1-C is mainly used to transmit E1 signal over IP network. It has 16*E1 interface, 2 UTP Ethernet port and 1*fiber Ethernet port. AN-TDM-IP-16E1-C can connect TDM device and user’s low cost wireless or lineate Ethernet/IP configuration, without affecting the voice quantity. assures connecting to physical E1 interface of any device seamlessly, such as PBX, mobile base station, SS7 signaling device and voice mail system. It can be used in the communication system based on E1, such as LAN, WAN, MAN and wireless network.
Providing emulation E1 channel through Ethernet, the difficulty is rebuilding timing information of E1 code stream effectively at the exit of network. The special disadvantages of Ethernet itself, such as random packet delay, without effective timing transmit mechanism, transmission error or collision that brings on packet lose, must be conquered. Our company resolves the difficulties above faultlessly through availing ourselves of technical advantage and adapting advanced clock disposal technology. AN-TDM-IP-16E1-C encapsulates the date of E1 code stream to the packet and transmits it to the remote device through Ethernet.
Features
-
Provide 1-16 E1 channels interface transparently, confirming to ITU-G.703.
-
High transmit efficiency, low transmit delay.
-
Provide 16*E1 channels and 2*10/100Base-TX and 1*100Base-X interface.
-
The length of Ethernet packet can be set, supporting huge packet.
-
User can select IP protocol encapsulation or simplicity Ethernet type.
-
Support VLAN setting.
-
Support Ethernet ping function.
-
Support package loss indicator function for E1 transmission line.
-
Local and remote E1 loop and local E1 enable function.
-
Point to point or point to multi-points connections, satisfying different applications.
-
High efficiency transmission, up to 90% bandwidth utility ratio.
-
Support two type interfaces-75Ω and 120Ω-unneed setting.
-
10/100M Ethernet, full/half duplex auto-adapt, support auto-MDIX.
-
When selecting network adaptation clock, it can resume the original clock accurately through TDM clock resumption mechanism, stable clock, little jitter and small excursion, conforming to ITU-T clock jitter and excursion standard.
-
The device Support WEB management platform, online software upgrades, the host side can manage the work of each state machine equipment.
Specifications
E1 Interface
Working environment
Model
|
AN-TDM-IP-16E1-C
|
Functional Description
|
16*E1 over Ethernet, Internal power AC220V/DC48V can be optional
|
Power
|
Power supply: AC100V ~ 260V; DC –48V;
Power consumption: ≤10W
|
Dimension
|
485X135X44.5mm(WXDXH)
|
Weight
|
2.3KG
|
Ordering Information
AN-TDM-IP-16E1-C16 x E1 over IP | TDM over IP | Low Delay Transmission Converter / Multiplexer, ordering options RJ-48/BNC for E1, 48VDC or AC 110-220 power options