AN-CWDM-MUX Modular Access System CWDM Multiplexing Systems Fiber Optical Multiplexers AD-Net Selangor, Malaysia, Kuala Lumpur (KL), Petaling Jaya (PJ) Supplier, Suppliers, Supply, Supplies

Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.

+603-7803 8228

clyeow@catacomm-corp.com

AN-CWDM-MUX Modular Access System

2 / 2

Quantity

Add Quotation

Description

AN-CWDM-MUX modular access system is designed to transmit multi-protocol signal one same fiber between 2 end points. The whole system is supported by AN-CWDM-MUX series chassis and CWDW-M series Module cards. From 2 to 16 different signal streams between 2 points can be transmitted by one or a pair of fiber. AD-net’s AN-CWDM-MUXseries CWDM devices can effectively replace layout of optical cables, which improves bandwidth utilization at a low cost.

It is applicable to the construction of short and medium-distance IP broadband Metropolitan Area Networks (MANS) and access networks, especially applicable to network carriers who:

1) cannot lay optical cables conveniently;

2) rent optical cables;

3) do not have sufficient optical cables;

4) want to improve the bandwidth utilization of optical cables.

AN-CWDM-MUX series devices are developed on the basis of CWDM technology, through which multiple wavelength channels with a wavelength interval of 20nm are multiplexed into one or a pair of fibers to implement signal transmission.

It can be used in point-to-point and point-to-multipoint application, and can also work with wavelength routers. With the application of non-cooling laser technology and EDFA technology, it has great cost advantage in building broadband MANS and access networks.

It can provide interfaces for multiple data formats, such as E1, Fast Ethernet, Gigabit Ethernet, STM-1/4/16 interfaces and fiber channels.

External interface: Interface for out signal input; interface type can be RJ45 or fiber port, connecting with switches and fiber optical converters etc, to implement signal input.

Internal interface: CWDM signal conversion port; output signal wavelengths are CWDM wave band (1470nm-1610nm), easy for multiplexing and output.

COM: Multiplexing signal output port, a port for signal output after multiplexing; interface type is SC.

Models are available in following configurations:

AN-CWDM-MUX4S single-fiber 4 channels bidirectional concourse

AN-CWDM-MUX8D dual-fiber 8 channels bidirectional concourse

AN-CWDM-MUX8S single-fiber 8 channels bidirectional concourse

AN-CWDM-MUX16D dual-fiber 16 channels bidirectional concourse

Features

Protocol: Seamless connection with Ethernet, SDH networks and fiber channels over same fiber;
Rate: 10Mbps-1.25Gbps adaptive, 2.5G optical module;
Extensible: 2-16 wave channels (optional);
Network topology: point-to-point, point-to-multipoint;
Fiber access: single mode, multi mode;
Twisted-pair access: 10Base-T, 100Base-TX, 1000Base-T;
Power supply: AC220V and DC-48V;
19-inch chassis structure, convenient for installation and use;
A maximum of 16-channel transmitting/ receiving optical signals can be multiplexed to a pair of fibers for transmission;
Open structure, supporting inter-connection and utilized together with other manufacturers’ devices.
Maximum capacity: 16 channels with dual fiber dark fiber
Both topologies – Point to Point & Point to Multipoint supported
Only 3U high
20 km 40km 60km 80km 110km distances as a ordering options

Specifications

Internal Optical Interface

Central wavelength:

1270nm | 1290nm |1310nm |1330nm| 1350nm |1370nm | 1430nm |1450nm

1470nm | 1490nm |1510nm |1530nm| 1550nm |1570nm | 1590nm |1610nm

Channel spacing: 20nm

Optical pass bandwidth: +/- 6 nm

Temperature drift of central wavelength: 0.08nm +/- 0.1nm/°C

Transmitted optical power: -10dBm +-3dBm

Received optical power: -24dBm +-3dBm

Optical receiving pass band: 1270nm – 1610nm

LOS alarm power at receive end: -25dBm -30dBm

Receiving sensitivity: < -20dBm

Maximum input power: 0dBm -+6dBm

Connector: SC/LC/FC

External interface

Connector: SC/LC/FC

Standard for optical interfaces: 100BASE-FX, 1000BASE-FX, STM-1/4/16 fiber ports are supported

Wavelength’s for above: 850nm; 1310nm; 1550nm

Fiber: Single-mode or multi-mode fiber

Twisted-pair electrical interface: RJ45

Twisted-pair interface standard: 10Base-T, 100Base-TX, 1000Base-T

Operating environment

Temperature & Humidity: 0 ~ 45, 10 ~ 90 non-condensing

Storage environment

Temperature & Humidity: -40 ~ 45, 10 ~ 90 non-condensing

Power supply

AC power: 90 ~ 260V, 50~60Hz

DC power: -36 -72V

power consumption: <70W

Dimensions: 440mm×220mm×132mm

Application Scenario:

Ordering Information

AN-CWDM-MUX4S	4 bidirectional channels over single fiber single mode, DC or AC
AN-CWDM-MUX8D	8 bidirectional channels over dual fiber single mode, DC or AC
AN-CWDM-MUX8S	8 bidirectional channels over single fiber single mode, DC or AC
AN-CWDM-MUX16D	16 bidirectional channels over dual fiber single mode, DC or AC

Please leave your enquiry here, we will reply as soon as possible.
Name*
Company Name
Product Interested
Quantity
Email*
Contact No.*
Attachment		*only support gif, jpeg, jpg, png, pdf
Messages*