- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comG.703 Converter 每 E3 to 16 E1 Multiplexer
| Previous | 3 / 6 | Next |
Description
AN-E3-E1 is compact, 1U high G.703 converter & E3 multiplexer which combines up to 16xE1 G.703 2Mbit/s lines into 1 E3 line (34 Mbit/s). AN-E3-E1 can be used as access multiplexer and concentrator in areas, where transmission line is delivered by E3 line, and there is a need to mux/demux signal in up to 16 E1 G.703 lines.
It’s very compact, just 1U unit can be installed anywhere in your rack, and can be configured by local terminal interface – RS-232 and RS-485 ports. The AN-E3-E1-MUX multiplexer support panel dip switch control of loop backs to allow for installation and maintenance checks.
Features
-
Comply with ITU-T G .703
-
E1 port has on-line error surveillance and loopbacktest function
-
RS-485 interface, RS-232 for control and maintanance;
-
Standard 19 inch 1 unit box G.703 converter
-
-48V DC or 220V AC or +24V DC power supply
-
Supply invalidation and loss indicationㄛremote AC220V power loss indication for terminal equipment as a plus
-
Substrate program on-line update supported.
Specifications
Capacity
16xE1 PDH signals at 2.048Mbps
E1 interface
Comply with ITU-T G.703 E1 recommendation
Bit rate: 2048kbps±50ppm
Line code: HDB3
Impedance: 75W (unbalanced) or 120W (balanced)
Connector socket: CC4 1.0/2.3
E3 interface
Comply with ITU-T G.703 E3 recommendation
Bit rate: 34368kbps±20ppm
Line code: HDB3
Impedance: 75W (unbalanced)
Connector socket: BNC
Power
DC type: ±48Vㄗ-36V to -72V or 36V to 72Vㄘor ±24V-18V…-36V, 18V…36Vㄘ
AC type: 220Vㄗ165V~265Vㄘ
Power consumption: £10W
Dimension
Width: 435mm
Height: 45mm
Deep: 244mm
Application Scenarios
Ordering Information
|
AN-E3-E1 |
E3 to 16 x E1 G.703 univrsal multiplexer, AC/DC power options, 75/120 ohm E1 interface option.
|