- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.comHDMI Over Ethernet LAN 4-Port Point to Multipoint Transmission System Set
Previous | 1 / 4 | Next |
To show you what it looks like when you use this PMP broadcast feature and have same signal on several remote HDMI monitors, we¡¯ve set up 1 central HDMI over Ethernet transmitter with 4 LAN ports and 3 remote HDMI over Ethernet receivers. Check it out how it works live.
Description
Special Point to Multipoint 4 x Ethernet port version set – HDMI extender transmission system extends HD video and audio over Ethernet LAN networks, over TCP/IP standard, support one to many application over Ethernet. At the same time, it’s more convenient with infrared extensions to make remote control.
Features
-
Support HDMI 1.3/HDCP1.1 & 1.2
-
Support point-to-point, point-to-multipoint transmission and cascaded
-
Ethernet standards with international standards
-
Support interlaced and progressive display mode
-
Support IR extend, you can control the set-top box or Blu-ray receiving site with an infrared remote control transmitter
-
Pure hardware design, plug and play, no need to install additional software
Specifications
Video Parameters
|
|
Video Resolution Support
|
640X480 @ 60fps 800X600 @ 60fps
|
1024X600 @ 60fps 1024X768 @ 60fps
|
|
1152X864 @ 60fps 1280X600 @ 60fps
|
|
1280X720@ 60fps 1280X768@ 60fps
|
|
1280X800@ 60fps 1280X960@ 60fps
|
|
1280X1024@ 60fps 1440X1050@ 60fps
|
|
1440×900 @ 60fps 1600×900 @ 60fps
|
|
1660×1200 @ 60fps 1680×1050 @ 60fps
|
|
1920×1080 @ 60fps 1920 x1200 @ 60fps
|
|
Sound
|
Sampling Rate£º32kHz, 44.1kHz and 48kHz
|
IR Support
|
38KHz; NEC code
|
HDMI version
|
HDMI 1.3
|
HDCP Version
|
HDCP 1.2
|
Other parameters
|
|
Power Input
|
DC input: 5V/2A
|
Maximum power consumption
|
AN-HDMI-ETH-EXT02/T: 10W
|
AN-HDMI-ETH-EXT02/R: 10W
|
|
Dimensions (length – width – height)
|
167mm*80mm*28mm
|
Physical NW
|
770g
|
Operating temperature / humidity
|
0¡æ – 70¡æ / 10% – 80%RH(Not frozen)
|
Storage temperature / humidity
|
-10¡æ – 80¡æ/ 5% -90% RH(Not frozen)
|
Ordering Information
AN-HDMI-ETH-EXT02/T
|
HDMI over Ethernet LAN 4 port Point to Multipoint Transmission System Transmitter side device (TX side).
|
AN-HDMI-ETH-EXT02/R-4
|
HDMI over Ethernet LAN 4 port Point to Multipoint Transmission System Receiver side device (RX 4 port side).
|
AN-HDMI-ETH-EXT02/R-1
|
HDMI over Ethernet LAN 1 port Point to Multipoint Transmission System Receiver side device (RX 1 port side).
|