- AD-Net
- Video Audio Transmission Equipment
- RCA & XLR Audio Over Fiber Extenders
- HD Video Transmission
- CCTV Video/Audio/Data
- HDMI KVM Over Fiber
- HDMI KVM Over UTP Cat5e/Cat6
- VGA KVM Over Fiber
- VGA KVM Over UTP Cat5e/Cat6
- DVI KVM Over Fiber
- DVI KVM Over UTP Cat5e/Cat6
- AHD CVI TVI CVBS Over Fiber
- HDMI Over Wired & Wireless LAN
- USB Over Fiber Extenders
- Video Baluns (Video Over UTP Cat5)
- HD AHD/TVI/CVI Video Baluns
- HD AHD/TVI/CVI/CVBS Active Video Baluns
- FTTX Access
- Fiber Modules
- Industrial Communication Products
- Media Converters
- Fiber Optical Multiplexers
- n x E1 G.703 Series Fiber Multiplexer
- n x E1 G.703 Series + Ethernet Series
- Serial & CANBUS Fiber Modem Series (V.35/RS422/485/232)
- SNMP Managed n x E1/V35/ETH Fiber Multiplexer
- STM1/E3/DS3/T3 Fiber Mux Series
- Voice Over Fiber Mux Series
- Rack Mount Chassis
- CWDM Multiplexing Systems
- Optical Line Protection Equipment
- Interface Converters
- Passive Optical Equipment
- SDH/MSPP Systems
- Switches
- Video Audio Transmission Equipment
- Four-Faith
Catacomm Corporation
Sdn Bhd
Unit E1-29-6, Block E1,
Dataran Prima, Jalan PJU 1/42,
47301 Petaling Jaya,
Selangor, Malaysia.
+603-7803 8228
+603-7803 8228
clyeow@catacomm-corp.com4 port USB 2.0 Over Fiber Optic Extender Kit
| Previous | 7 / 9 | Next |
What we have here is a receiver side of USB over Fiber Extender set, which get¡¯s connected to PC, and then another side ¨C 4 port USB 2.0 transmitter where we connect USB camera and USB flash drive same time.
Description
4 port USB 2.0 Fiber Optic Extender, Also called 4 Fort USB2.0 To Fiber Converter. The device includes a transmitter and a receiver, which can extend USB 2.0 device to a remote location over 1 fiber cable, max distance 250m (SM or MM fiber cable). An integrated four port hub allows for extension of up to four USB devices without the need for an additional hub. The device can be widely used in military command and control system, police command and control system, traffic management system, energy and electricity supply industry, government office, medical system, commercial presentation, multimedia and public utilities etc.
Features
-
Max extension distance 250m (SM or MM fiber cable).
-
Single/Duplex fiber transmission, pure hardware design, no driver needed, compatible with all operation systems, support plug and play
-
Auto recognition of High-speed (25Mbps~480Mbps), Full-speed (500Kbps~12Mbps), Low-speed (10Kbps~1.5Mbps) USB device.
-
Support USB1.1 and USB 2.0 devices, cameras, printers, U disk, scanners, audio devices, touch screens, game controllers, mouse and keyboard, etc.
Specifications
|
Optical
|
Connector
|
SM/MM SC/FC/ST
|
|
Wave length
|
1310nm/1550nm
|
|
|
Physical
|
Size (L× W ×H)
|
104mm x104mm x28mm
|
|
Case
|
Aluminum
|
|
|
Color
|
Black
|
|
|
N.W.
|
0.75Kg
|
|
|
Power
|
Voltage
|
5V DC
|
|
sender power consumption
|
<5W
|
|
|
receiver power consumption
|
<5W
|
|
|
Environment
|
Working temperature
|
-20¡æ-70¡æ
|
|
Storage temperature
|
-40-85¡æ
|
|
|
Humidity
|
0-95% (non-condensing)
|
USB interface (Type A)
|
RX
|
1, connect to PC
|
|
TX
|
4 , connect to USB devices, max 500mA
|
Note: The USB indicator green light flash when the device is connected well, otherwise you need to re plug USB devices.
Ordering Information
|
AN-USB-EXT-2.0-4
|
4 PORT USB 2.0 To Fiber Optic Extender set, Transmitter + Receiver, Supports USB 2.0, USB 1.1 & USB 1.0 (not compatible to USB 3.0 or USB 3.1), max distance 250 m, universal Single mode and Multimode Cable support.
|